Grain dryer 10-15 ton product series
Product features:
1.Low rotation speed auger and anti-crushing hoist ensures low breakage rate of grain and good quality drying;
2.The hoist is designed with two barrels and equipped with the anti-damage device to reduce the breakage rate of grain;
3.The gear motor and NSK/ASAHI bearing imported from Japan are used;
4.The design of vertical four-slot and the large drying layer ensures high drying efficiency and good quality;
5.The part in contact with grain is designed with stainless steel to increase wear and corrosion resistance;
6.The manganese steel is used for auger, and the surface is hard and wear-resistant after special treatment;
7.The grain dryer loT smart system is optional.
Product parameter:
Product model |
HN-10.5 |
HN-12 |
HN-15 |
||
Structural type |
Batch cycle |
||||
Drying layer height h (mm) |
1200 |
1200 |
1200 |
||
Box size (length x width x height) (mm) |
1895x2250x6600 |
1895x2250x7210 |
1895x2250x8430 |
||
Dimension (length x width x height) (mm) |
3870x2250x7575 |
3870x2250x8185 |
3870x2250x9405 |
||
Capacity (kg) |
Paddy (560kg/m3) |
3000-10500 |
3000-12000 |
3000-15000 |
|
Wheat (680kg/m3) |
3640-12750 |
3640-14570 |
3640-18210 |
||
Heat supply |
Blast air heater, boiler, burner |
||||
Heating method |
Indirect heating |
||||
Supporting power supply |
Three-phase, 380V, 50Hz |
||||
Whole machine power (Kw) |
7.15 |
7.15 |
7.15 |
||
Performance |
Feeding time (about minutes) |
32 |
36 |
40 |
|
Discharge time (about minutes) |
38 |
43 |
48 |
||
Precipitation rate (%/hour) |
0.6-1.0 |
||||
Safety device |
Automatic fault alarm, temperature control, overload protection, leakage protection, full grain alarm, automatic shutdown. |
Contact: Janet
Phone: +86-18119998478
Tel: +86-0551-62864801
Email: [email protected]
Add: Area 5, Intersection of New Industrial Park and Zipeng Town, Hefei, Anhui, China 230001